2007-2021 Tundra 5.7L Stage 2 Intercooled Turbo Kit - 600HP+
**FREE Heat Wrap Kit & Innovate SCG1 - Ends 04/30/25
Price Match Guarantee
Found it for less but value our service?
Details
2007-2021 Toyota Tundra 5.7L 3UR-FE Single Stage 2 Intercooled Turbo Kit, FMIC, 600HP+ / 700TQ by TurboKits.com
Turbo Kit Development Forum Thread: https://www.tundras.com/threads/turbo-charging-a-tundra.115951/
5.21 0-60 at only 6.7 PSI
Wake the inner BEAST of your 5.7L Toyota Tundra with power beyond your WILDEST expectations. Never before has there been a package so potent, so complete, so easy to install that offers power beyond the 584 ft. lbs., 520 HP level TO THE WHEELS at just 7 PSI of boost! Image bolting on an additional 269 HP and 329 pond feet of Torque? After years and a combined 50,000+ miles of on truck testing under all conditions, ie; Towing, Heavy Towing, Off Road, Daily Driving, Long Distance, etc. The Stage 2 Kit is ready for your Tundra 5.7L. Yes, we have hinted this kit would become available and FINALLY, after years of painstakingly testing this system on all the incredible 5.7L Toyota Tundra platforms, the Stage 2 Intercooled Turbo Kit from the best turbo kit builders on the planet, is ready to ship! The HP and TQ numbers are amazing, we know the 5.7L Toyota motor CRAVES boost, but what’s the one thing in all our testing through the scorching heat of summer and the icy cold mornings of winter did we pay extremely close attention to? The tune! Smooth acceleration when you want it, tire shredding power when you need it, this turbo kit delivers! The expertly designed Stage 2 turbo kit will open the door to more HP and TQ, greater fuel efficiency, faster acceleration, and improved towing capability. This bolt on turbo package includes everything you’ll need to upgrade your truck- All the piping, lines, fittings, hardware, clamps and couplers, and FREE friendly tech support is included! You’ve wanted a more powerful Tundra for a long time and TurboKits.com just made it easy!
Tuning your Turbo Tundra:
The base ECU calibration is included with the purchase of your turbo kit. You have two options to get the mapping flashed to your ECU:
- Purchase the HP Tuners System to use for uploading the base map and use for any additional tuning you may want to do. The system and cable is yours to keep.
- Rent the tune upload cable from TurboKits.com. By paying the deposit amount, we’ll ship the cable to you so you can use the software to upload the tune. Once your tune is loaded onto your truck’s ECU, ship the cable back to us and receive your deposit back. (4) HP tuning credits at $50ea and $495.00 Tune amount will be deducted from the deposit refund.
Tundra Turbo System Includes:
- Precision 7675 T4 Turbo
- Precision 46mm Wastegate
- Forge Billet Blow Off Valve (BOV)
- Custom High FLOW Mass Air Sensor (MAF)
- HP Tuners Stage 2 Calibration
- SS Mendrel Bent Cross Over Pipe
- SS Mandrel Bent Turbo Pipe
- SS Mandrel Bent 3" Downpipe w- Extra O2 Bung
- SS Y Pipe for Factory Exhaust Connection
- Wastegate "Screamer" Shootout Pipe
- DIY Wastegate Recirclation Kit
- Huge Front Mount Intercooler
- Intercooler Mounting Bracket with Trans Cooler Provisions
- T6061 Mandrel Bent Charger Piping
- Custom Screened High Flow MAF Housing
- Custom Couplers for Lifetime Quiet FMIC Connection
- Vibrant SS V-Band Clamps
- Misc Couplers, Clamps, Fittings, Lines, Gaskets
- Step by Step COLOR PDF Installation Instructions & More
Optional Turbo Kit Items:
- Innovate SCG1 Wideband, Boost Gauge and Boost Controller
- HP Tuners MPVI ProLink w- 4 Credits
- NGK 1 Step Colder Spark Plugs
- Turbo Blanket, Wrap and Heat Protection Kit
Notes:
*For OFF ROAD USE ONLY, CANNOT SHIP TO CALIFORNIA
**Professional Installation and Tuning Suggested
***Suspension lifts on 4WD trucks above and beyond the standard 2-3” leveling kits will require custom modification to the cross over pipe by the installer.
****Engine pictures are for illustration purposes only, you do NOT need to remove the motor to install the turbo kit!
*****Stage 2, 650cc Injectors are good to about 6 PSI. Over that and a fuel pump is suggested as well. In all reality, the pump is "cheap insurance" and is highly suggsted with any FI build. But the 6 PSI mark is where we see the stock pump start to get overworked.
More Information
| Brand | TurboKits.com |
|---|---|
| Type of Part | Turbo Kits |
| Engine Fitment | 5.7L |
| Length | 44 |
| Width | 20 |
| Height | 20 |
| Weight | 115.000000 |
Reviews
Fitment
2007-2021 Toyota Tundra 5.7L 3UR-FE Single Stage 2 Intercooled Turbo Kit, FMIC, 600HP+ / 700TQ by TurboKits.com
Turbo Kit Development Forum Thread: https://www.tundras.com/threads/turbo-charging-a-tundra.115951/
5.21 0-60 at only 6.7 PSI
Wake the inner BEAST of your 5.7L Toyota Tundra with power beyond your WILDEST expectations. Never before has there been a package so potent, so complete, so easy to install that offers power beyond the 584 ft. lbs., 520 HP level TO THE WHEELS at just 7 PSI of boost! Image bolting on an additional 269 HP and 329 pond feet of Torque? After years and a combined 50,000+ miles of on truck testing under all conditions, ie; Towing, Heavy Towing, Off Road, Daily Driving, Long Distance, etc. The Stage 2 Kit is ready for your Tundra 5.7L. Yes, we have hinted this kit would become available and FINALLY, after years of painstakingly testing this system on all the incredible 5.7L Toyota Tundra platforms, the Stage 2 Intercooled Turbo Kit from the best turbo kit builders on the planet, is ready to ship! The HP and TQ numbers are amazing, we know the 5.7L Toyota motor CRAVES boost, but what’s the one thing in all our testing through the scorching heat of summer and the icy cold mornings of winter did we pay extremely close attention to? The tune! Smooth acceleration when you want it, tire shredding power when you need it, this turbo kit delivers! The expertly designed Stage 2 turbo kit will open the door to more HP and TQ, greater fuel efficiency, faster acceleration, and improved towing capability. This bolt on turbo package includes everything you’ll need to upgrade your truck- All the piping, lines, fittings, hardware, clamps and couplers, and FREE friendly tech support is included! You’ve wanted a more powerful Tundra for a long time and TurboKits.com just made it easy!
Tuning your Turbo Tundra:
The base ECU calibration is included with the purchase of your turbo kit. You have two options to get the mapping flashed to your ECU:
- Purchase the HP Tuners System to use for uploading the base map and use for any additional tuning you may want to do. The system and cable is yours to keep.
- Rent the tune upload cable from TurboKits.com. By paying the deposit amount, we’ll ship the cable to you so you can use the software to upload the tune. Once your tune is loaded onto your truck’s ECU, ship the cable back to us and receive your deposit back. (4) HP tuning credits at $50ea and $495.00 Tune amount will be deducted from the deposit refund.
Tundra Turbo System Includes:
- Precision 7675 T4 Turbo
- Precision 46mm Wastegate
- Forge Billet Blow Off Valve (BOV)
- Custom High FLOW Mass Air Sensor (MAF)
- HP Tuners Stage 2 Calibration
- SS Mendrel Bent Cross Over Pipe
- SS Mandrel Bent Turbo Pipe
- SS Mandrel Bent 3" Downpipe w- Extra O2 Bung
- SS Y Pipe for Factory Exhaust Connection
- Wastegate "Screamer" Shootout Pipe
- DIY Wastegate Recirclation Kit
- Huge Front Mount Intercooler
- Intercooler Mounting Bracket with Trans Cooler Provisions
- T6061 Mandrel Bent Charger Piping
- Custom Screened High Flow MAF Housing
- Custom Couplers for Lifetime Quiet FMIC Connection
- Vibrant SS V-Band Clamps
- Misc Couplers, Clamps, Fittings, Lines, Gaskets
- Step by Step COLOR PDF Installation Instructions & More
Optional Turbo Kit Items:
- Innovate SCG1 Wideband, Boost Gauge and Boost Controller
- HP Tuners MPVI ProLink w- 4 Credits
- NGK 1 Step Colder Spark Plugs
- Turbo Blanket, Wrap and Heat Protection Kit
Notes:
*For OFF ROAD USE ONLY, CANNOT SHIP TO CALIFORNIA
**Professional Installation and Tuning Suggested
***Suspension lifts on 4WD trucks above and beyond the standard 2-3” leveling kits will require custom modification to the cross over pipe by the installer.
****Engine pictures are for illustration purposes only, you do NOT need to remove the motor to install the turbo kit!
*****Stage 2, 650cc Injectors are good to about 6 PSI. Over that and a fuel pump is suggested as well. In all reality, the pump is "cheap insurance" and is highly suggsted with any FI build. But the 6 PSI mark is where we see the stock pump start to get overworked.
