2009-2017 Ram 5.7L Hemi Single Turbo Kit
TAGS: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, Dodge Ram, 1500, 2500, 5.7L Hemi, Single Turbo Kit, On3
Details
2009-2017 Ram 1500/2500 5.7L Hemi Single Turbo Kit
The wait is finally over on the Ram truck kit! Extensive testing has been done on the shop truck to bring you an affordable bolt on power adder 2009-2017 Ram 1500/2500 5.7L Hemi turbo kit. The base kit will start out with the proven 7875 cast wheel journal bearing turbo charger. Tested on a 100% stock engine it makes just over 500hp/540ft on 93 octane and a conservative tune. It was then pushed with E85 and made 560hp/600ft on only 7lbs of boost. This all on 100% bone stock engine and the base single T4 turbo kit. This is where we feel comfortable as a good stopping point for a stock engine with stock ring gaps. This is 234hp over the bone stock baseline of the test truck! After having the proper fueling, a test was run with the T6 version of the kit and the proper supporting parts; Flyin Ryan Performance camshaft and drop in piston and rod combo. The T6 80mm Billet Wheel turbo kit made 722hp on only 9.5lbs of boost. This combo is 1000hp capable!
This kit is designed to retain all factory amenities. Works with factory AC and for some of you guys with power goals above 500hp you will need a more free flowing exhaust. Each kit will include a cutout provision in the downpipe with a block off flange. If you would like an electronic cutout it is listed in the upgrades section. This route is perfect for the guys that drive their trucks daily, with the cutout closed it remains tame and comfortable.
Supporting Mods: To reach the horsepower goals this kit is capable of offering you will need to upgrade the fuel system & map sensor at minimum. These are kits offered here as an upgrade to you but are not included in the kit, due to the fact that some of you already have some upgrades you’ve done previously. The test Ram 5.7L Hemi was using the fuel system that is designed to put a pair of 320lph fuel pumps and billet holder in the stock basket. From there the fittings and line to run -8an fuel line for the feed and the return that including an inline fuel filter that uses a stainless element that can be ran with regular gas or e85 rouds out the fuel upgrade. This also comes with the fuel pressure regulator with a mounting bracket to bolt to the stock 5.7 intake, a fuel pressure gauge. Make sure you choose the correct injectors depending on the power goal and fuel type you plan to run.
2009-2017 Ram 1500/2500 5.7L Hemi Kit Includes:
- Complete Stainless 304 crossover with v-band connections
- Custom Stainless Downpipe from 3 to 3.5″, T6 is 4″
- Custom Stainless casted Turbo Manifold
- Complete Cold side, 6061 polished aluminum 2.5″- 3″, all bead rolled. T6 Kit is all 3″tubing
- On 3 78mm Journal Turbocharger
- On 3 60mm v-banded wastegate
- On 3 50mm Blow off valve
- On 3 3″ core air to air intercooler * upgrades available*
- On 3 Performance 5 ply silicon couplers (Black) and stainless t-bolt clamps
- SS v-band clamps
- Lap band clamp for turbo back tubing
- Custom laser cut, formed intercooler brackets and hardware
- Complete oil feed/drain kit
- Oil Sandwhich Plate
- Cut-out block off plate
- Installation Guide Disc- For use in computer only
Fuel System Upgrade:
This upgrade is listed at the bottom of the check boxes. This will include (2) On3 320lph fuel pumps with their Billet Hanger and ram specific bracket to attach them to the factory fuel hat. All Black nylon Braided 8an fuel line, fuel filter and fittings necessary to hook to a set of stock ram fuel rails and a Boost reference fuel pressure regulator to make it a true return style system. Also includes an installation guide.
More Information
| Part Number | ON3-RAM57-TKIT |
|---|---|
| Brand | On 3 Performance |
| Type of Part | Turbo Kits |
| Engine Fitment | 5.7L HEMI |
| Length | 42 |
| Width | 24 |
| Height | 20 |
| Weight | 105.000000 |
Reviews
Top customer reviews
Response from TurboKits.com
Fitment
2009-2017 Ram 1500/2500 5.7L Hemi Single Turbo Kit
The wait is finally over on the Ram truck kit! Extensive testing has been done on the shop truck to bring you an affordable bolt on power adder 2009-2017 Ram 1500/2500 5.7L Hemi turbo kit. The base kit will start out with the proven 7875 cast wheel journal bearing turbo charger. Tested on a 100% stock engine it makes just over 500hp/540ft on 93 octane and a conservative tune. It was then pushed with E85 and made 560hp/600ft on only 7lbs of boost. This all on 100% bone stock engine and the base single T4 turbo kit. This is where we feel comfortable as a good stopping point for a stock engine with stock ring gaps. This is 234hp over the bone stock baseline of the test truck! After having the proper fueling, a test was run with the T6 version of the kit and the proper supporting parts; Flyin Ryan Performance camshaft and drop in piston and rod combo. The T6 80mm Billet Wheel turbo kit made 722hp on only 9.5lbs of boost. This combo is 1000hp capable!
This kit is designed to retain all factory amenities. Works with factory AC and for some of you guys with power goals above 500hp you will need a more free flowing exhaust. Each kit will include a cutout provision in the downpipe with a block off flange. If you would like an electronic cutout it is listed in the upgrades section. This route is perfect for the guys that drive their trucks daily, with the cutout closed it remains tame and comfortable.
Supporting Mods: To reach the horsepower goals this kit is capable of offering you will need to upgrade the fuel system & map sensor at minimum. These are kits offered here as an upgrade to you but are not included in the kit, due to the fact that some of you already have some upgrades you’ve done previously. The test Ram 5.7L Hemi was using the fuel system that is designed to put a pair of 320lph fuel pumps and billet holder in the stock basket. From there the fittings and line to run -8an fuel line for the feed and the return that including an inline fuel filter that uses a stainless element that can be ran with regular gas or e85 rouds out the fuel upgrade. This also comes with the fuel pressure regulator with a mounting bracket to bolt to the stock 5.7 intake, a fuel pressure gauge. Make sure you choose the correct injectors depending on the power goal and fuel type you plan to run.
2009-2017 Ram 1500/2500 5.7L Hemi Kit Includes:
- Complete Stainless 304 crossover with v-band connections
- Custom Stainless Downpipe from 3 to 3.5″, T6 is 4″
- Custom Stainless casted Turbo Manifold
- Complete Cold side, 6061 polished aluminum 2.5″- 3″, all bead rolled. T6 Kit is all 3″tubing
- On 3 78mm Journal Turbocharger
- On 3 60mm v-banded wastegate
- On 3 50mm Blow off valve
- On 3 3″ core air to air intercooler * upgrades available*
- On 3 Performance 5 ply silicon couplers (Black) and stainless t-bolt clamps
- SS v-band clamps
- Lap band clamp for turbo back tubing
- Custom laser cut, formed intercooler brackets and hardware
- Complete oil feed/drain kit
- Oil Sandwhich Plate
- Cut-out block off plate
- Installation Guide Disc- For use in computer only
Fuel System Upgrade:
This upgrade is listed at the bottom of the check boxes. This will include (2) On3 320lph fuel pumps with their Billet Hanger and ram specific bracket to attach them to the factory fuel hat. All Black nylon Braided 8an fuel line, fuel filter and fittings necessary to hook to a set of stock ram fuel rails and a Boost reference fuel pressure regulator to make it a true return style system. Also includes an installation guide.
