Details
2020, 2021, 2022, 2023, 2024+, Chevrolet Corvette C8, Twin Turbo Kit, Oil-less Ball Bearing Turbos, Huron Speed
Available for purchase in many variations to suit all of your needs for goals, brands and budget!
New enhancements that are now Standard in this kit are:
-Fitment confirmed on BOTH Coupe and HTC cars!
-Heat Shielding to the OR and T4 Hot-side tubes
-Downpipes are a full 3", true X-pipe design with wastegate recirculation for the best and cleanest sounding setup! Downpipes feature v-band and slip fit connections to allow adjustments to get your desired tip alignment and fit with a variety of different turbos.
-Cold-side tubing that places the MAF in a larger 4" Aluminum tube into the throttle body.
-Turbo fitment is for T4 turbine housings with S-covers so we can stay conservative for low boost/stock engine combos or go large for those looking for 1500+!
-Available as non-intercooled, Intake manifold air-2-water, Air box location Air-2-water intercooler and 2 different Frunk water tank options with a Driver's side Cove Heat Exchanger!
**Requires Installation and Professional Tuning, not included. We recommend tuning in Speed Density for the Non-Intercooled version, if looking for a remote tune we highly recommend Elite Tuned who can assist with your entire tuning process.
Oil-less Twin Turbo Kit for C8 Kit Features:
o Fits T4 inlet Turbochargers ranging from Billet 6262s up to Billet 6875s. This allows us to supply a very quick spooling set-up on a factory engine, up to 1500+ RWHP capability along with a very easy installation. Retain the OEM cats, bolt in aftermarket High-Flow cats, or run OR, our kit allows for all options in their standard form, your choice!
o Full 3" Stainless Steel Downpipes are standard, sending the exhaust through an X for that great sound with wastegate recirculation out the factory bumper with quad Carbon Fiber wall tips. Bungs already in place to relocate the C8's Wideband O2 sensors post-turbo.
o 2.5" Aluminum, Powder-coated Cold-side piping connects the turbochargers to the throttle body via a combination of Silicone Couplers and Dual-Seal clamps featuring Dual 50mm BOV flanges and flange for the OEM MAF sensor.
o 4" Air-filters fit directly onto the turbos to allow fresh air and keep the turbos happy for a long, debris-free life!
o Requires NO drilling/tapping for the oiling unless customer prefers.
o No heat issues like many top mount systems along with a very easy installation!
o Includes all necessary brackets and hardware
C8 Turbo System Included Components:
o Full Hot-side including Stainless steel OR and T4 Hot-side tubes that are fully heat shielded w/ 44-46mm WG flanges, full stainless 3" downpipes with X, wastegate recirculation, O2 bungs Carbon Tips, and factory hangers.
o Powder-coated Aluminum Cold-side tubing
o 4" S&B Filters for each turbo
o All required silicone couplers and T-bolt clamps
o O2 extensions if you wish to move the C8s factory Wideband sensors into the downpipes for Post-Turbo use.
o All required brackets and hardware
o All required Grade-8 Hardware
o Non-intercooled, or Air-2-Water Intercooler options available in many different forms when having us perform the installation.
More Information
| Brand | Huron Speed |
|---|---|
| Type of Part | Turbo Kits |
| Engine Fitment | 6.2L |
| Length | 52 |
| Width | 24 |
| Height | 20 |
| Weight | 115.000000 |
Reviews
Fitment
2020, 2021, 2022, 2023, 2024+, Chevrolet Corvette C8, Twin Turbo Kit, Oil-less Ball Bearing Turbos, Huron Speed
Available for purchase in many variations to suit all of your needs for goals, brands and budget!
New enhancements that are now Standard in this kit are:
-Fitment confirmed on BOTH Coupe and HTC cars!
-Heat Shielding to the OR and T4 Hot-side tubes
-Downpipes are a full 3", true X-pipe design with wastegate recirculation for the best and cleanest sounding setup! Downpipes feature v-band and slip fit connections to allow adjustments to get your desired tip alignment and fit with a variety of different turbos.
-Cold-side tubing that places the MAF in a larger 4" Aluminum tube into the throttle body.
-Turbo fitment is for T4 turbine housings with S-covers so we can stay conservative for low boost/stock engine combos or go large for those looking for 1500+!
-Available as non-intercooled, Intake manifold air-2-water, Air box location Air-2-water intercooler and 2 different Frunk water tank options with a Driver's side Cove Heat Exchanger!
**Requires Installation and Professional Tuning, not included. We recommend tuning in Speed Density for the Non-Intercooled version, if looking for a remote tune we highly recommend Elite Tuned who can assist with your entire tuning process.
Oil-less Twin Turbo Kit for C8 Kit Features:
o Fits T4 inlet Turbochargers ranging from Billet 6262s up to Billet 6875s. This allows us to supply a very quick spooling set-up on a factory engine, up to 1500+ RWHP capability along with a very easy installation. Retain the OEM cats, bolt in aftermarket High-Flow cats, or run OR, our kit allows for all options in their standard form, your choice!
o Full 3" Stainless Steel Downpipes are standard, sending the exhaust through an X for that great sound with wastegate recirculation out the factory bumper with quad Carbon Fiber wall tips. Bungs already in place to relocate the C8's Wideband O2 sensors post-turbo.
o 2.5" Aluminum, Powder-coated Cold-side piping connects the turbochargers to the throttle body via a combination of Silicone Couplers and Dual-Seal clamps featuring Dual 50mm BOV flanges and flange for the OEM MAF sensor.
o 4" Air-filters fit directly onto the turbos to allow fresh air and keep the turbos happy for a long, debris-free life!
o Requires NO drilling/tapping for the oiling unless customer prefers.
o No heat issues like many top mount systems along with a very easy installation!
o Includes all necessary brackets and hardware
C8 Turbo System Included Components:
o Full Hot-side including Stainless steel OR and T4 Hot-side tubes that are fully heat shielded w/ 44-46mm WG flanges, full stainless 3" downpipes with X, wastegate recirculation, O2 bungs Carbon Tips, and factory hangers.
o Powder-coated Aluminum Cold-side tubing
o 4" S&B Filters for each turbo
o All required silicone couplers and T-bolt clamps
o O2 extensions if you wish to move the C8s factory Wideband sensors into the downpipes for Post-Turbo use.
o All required brackets and hardware
o All required Grade-8 Hardware
o Non-intercooled, or Air-2-Water Intercooler options available in many different forms when having us perform the installation.
