2022+ WRX FA24 AMS Top Mount Intercooler Upgrade
Details
2022, 2023, 2024 Subaru WRX, FA24, Intercooler Upgrade, Top Mount Intercooler, TMIC, AMS Performance, AMS.50.09.0001-1
The AMS Performance 2022+ Subaru WRX Top Mount Intercooler provides exceptional heat transfer efficiency due to its superior engineering, materials, and construction. Our team specified the highly efficient 4″ thick intercooler core based on years of motorsports experience which will help keep your intake temps lower and maintain the maximum power output of your WRX, no matter the conditions. With a 71% increase in core size over factory, higher volume cast aluminum end tanks, and TIG welded by hand in the USA, the AMS Performance 2022+ Subaru WRX Top Mount Intercooler redefines heat management for the FA24 engine.
• MASSIVE 71% INCREASE IN CORE SIZE OVER STOCK
• 48.6°F REDUCTION IN CHARGE AIR TEMP COMPARED TO OEM TMIC
• HUGE 21”X7.5”X4” BAR AND PLATE CORE TO FILL THE FACTORY HOOD SCOOP AND DUCT
• 15% LB/MIN INCREASE IN MASS AIRFLOW OVER OEM TMIC
• 12% REDUCTION IN PRESSURE DROP COMPARED TO STOCK
• 37 ROW INTERCOOLER CORE FOR EXCELLENT EFFICIENCY
• ONE OF THE LARGEST TOP MOUNT INTERCOOLERS AVAILABLE ON THE MARKET
• LOUVERED FINS INSIDE AND OUT INCREASES SURFACE AREA FOR HEAT TRANSFER
• ALL AMS INTERCOOLERS ARE PRESSURE TESTED BEFORE BOXING
• DIRECT BOLT IN DESIGN AND REQUIRES ZERO CUTTING FOR EASY INSTALL
APPLICATION(S):
• 2022+ Subaru WRX w/ FA24 Engine (Incl. All Sub-models)
INCREASED SIZE FOR MAXIMUM COOLING ON YOUR SUBIE
In addition to its remarkable 71% core size increase, the AMS Performance 2022+ Subaru WRX Top Mount Intercooler boasts an impressive 48.6°F reduction in charge air temperature compared to the OEM top mount intercooler, ensuring your engine operates optimally even under extreme conditions. Its substantial 21″x7.5″x4″ bar and plate core perfectly fill the factory hood scoop and duct, maximizing heat transfer efficiency and lowering charge air temps. Cooler intake charge air equals more horsepower potential!
UNPARALLELED FITMENT THROUGH PROPER ENGINEERING
The 2022+ Subaru WRX Top Mount Intercooler was designed using Solidworks© 3D CAD software by our SnailWorks© Engineering Team to be the best performing on the market. Even the small details have been designed to smoothly feed air into the FA24 engine. The attention to detail in the design of the new 2022+ WRX TMIC sets it apart from everything on the market.
Our SnailWorks© Engineering Team set out to make this intercooler upgrade not only the most effective on the market but simple to install. By using the factory mounting locations and hardware, the intercooler neatly bolts into place so you or your trusted mechanic can install it quickly and easily. With zero cutting or trimming required for install, the AMS Performance 2022+ Subaru WRX Top Mount Intercooler is a perfect fit.
PRODUCT NOTES
Compatible with OEM or most OEM-style aftermarket charge pipes.
CARB AND / OR EPA COMPLIANCE TESTING NOT COMPLETED
While we believe this product is either CARB EO exemption applicable, or complies with the EPA's Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of California, or available to ship to California addresses, without a completed AMS Race Waiver form. International users outside of the United States should act in accordance with their local laws and regulations.
More Information
| Part Number | AMS.50.09.0001-1 |
|---|---|
| Brand | AMS Performance |
| Type of Part | Intercoolers |
| Engine Fitment | FA24 |
| Length | 30 |
| Width | 14 |
| Height | 10 |
| Weight | 35.000000 |
Reviews
Fitment
2022, 2023, 2024 Subaru WRX, FA24, Intercooler Upgrade, Top Mount Intercooler, TMIC, AMS Performance, AMS.50.09.0001-1
The AMS Performance 2022+ Subaru WRX Top Mount Intercooler provides exceptional heat transfer efficiency due to its superior engineering, materials, and construction. Our team specified the highly efficient 4″ thick intercooler core based on years of motorsports experience which will help keep your intake temps lower and maintain the maximum power output of your WRX, no matter the conditions. With a 71% increase in core size over factory, higher volume cast aluminum end tanks, and TIG welded by hand in the USA, the AMS Performance 2022+ Subaru WRX Top Mount Intercooler redefines heat management for the FA24 engine.
• MASSIVE 71% INCREASE IN CORE SIZE OVER STOCK
• 48.6°F REDUCTION IN CHARGE AIR TEMP COMPARED TO OEM TMIC
• HUGE 21”X7.5”X4” BAR AND PLATE CORE TO FILL THE FACTORY HOOD SCOOP AND DUCT
• 15% LB/MIN INCREASE IN MASS AIRFLOW OVER OEM TMIC
• 12% REDUCTION IN PRESSURE DROP COMPARED TO STOCK
• 37 ROW INTERCOOLER CORE FOR EXCELLENT EFFICIENCY
• ONE OF THE LARGEST TOP MOUNT INTERCOOLERS AVAILABLE ON THE MARKET
• LOUVERED FINS INSIDE AND OUT INCREASES SURFACE AREA FOR HEAT TRANSFER
• ALL AMS INTERCOOLERS ARE PRESSURE TESTED BEFORE BOXING
• DIRECT BOLT IN DESIGN AND REQUIRES ZERO CUTTING FOR EASY INSTALL
APPLICATION(S):
• 2022+ Subaru WRX w/ FA24 Engine (Incl. All Sub-models)
INCREASED SIZE FOR MAXIMUM COOLING ON YOUR SUBIE
In addition to its remarkable 71% core size increase, the AMS Performance 2022+ Subaru WRX Top Mount Intercooler boasts an impressive 48.6°F reduction in charge air temperature compared to the OEM top mount intercooler, ensuring your engine operates optimally even under extreme conditions. Its substantial 21″x7.5″x4″ bar and plate core perfectly fill the factory hood scoop and duct, maximizing heat transfer efficiency and lowering charge air temps. Cooler intake charge air equals more horsepower potential!
UNPARALLELED FITMENT THROUGH PROPER ENGINEERING
The 2022+ Subaru WRX Top Mount Intercooler was designed using Solidworks© 3D CAD software by our SnailWorks© Engineering Team to be the best performing on the market. Even the small details have been designed to smoothly feed air into the FA24 engine. The attention to detail in the design of the new 2022+ WRX TMIC sets it apart from everything on the market.
Our SnailWorks© Engineering Team set out to make this intercooler upgrade not only the most effective on the market but simple to install. By using the factory mounting locations and hardware, the intercooler neatly bolts into place so you or your trusted mechanic can install it quickly and easily. With zero cutting or trimming required for install, the AMS Performance 2022+ Subaru WRX Top Mount Intercooler is a perfect fit.
PRODUCT NOTES
Compatible with OEM or most OEM-style aftermarket charge pipes.
CARB AND / OR EPA COMPLIANCE TESTING NOT COMPLETED
While we believe this product is either CARB EO exemption applicable, or complies with the EPA's Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of California, or available to ship to California addresses, without a completed AMS Race Waiver form. International users outside of the United States should act in accordance with their local laws and regulations.
