aFe POWER BladeRunner GT Series Intercooler with Tubes
Details
DETAILS:
+12 HP and +19 lbs. x ft. Torque max gains
Outflows stock intercooler
3" Bar and Plate Core Design
3" Billet Aluminum Inlet/Outlet
100% TIG-Welded
1/8" NPT brass condensation drain with included plug
Includes 3" mandrel bent aluminum hot & cold side tubes
Powder-coated wrinkle-black for heat resistance
1/8" NPT port, are provided for connecting pressure sensors or water methanol injection
5-Ply Polyester Reinforced Silicone coupling for strength
Includes premium stainless steel spring loaded t-bolt clamps for a secure fit
Includes hardware for a hassle-free installation
Reduces intake air temperatures up to 30 degrees
This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler set up for more power.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.
3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow.
Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses 3" inlets and outlets for superior strength and durability..
TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.
Condensation Drain:
The intercooler includes a 1/8" NPT vent, which can be used to drain any type of build up from the intercooler.
Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel spring loaded t-bolt clamps and heavy-duty 5-Ply couplings for strength.
Flow and Performance:
aFe Power's intercooler tube are constructed from 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. Also included is four 1/8" NPT port which is provided for a sensor or water-methanol injection.
aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tubes for an aggressive style.
Note:
This intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
More Information
| Part Number | 46-20282-B |
|---|---|
| Brand | aFe Power |
| Type of Part | Intercoolers |
| Engine Fitment | 5.0L Cummins V8 |
| Length | 51 |
| Width | 24 |
| Height | 14 |
| Weight | 75.000000 |
Reviews
Fitment
DETAILS:
+12 HP and +19 lbs. x ft. Torque max gains
Outflows stock intercooler
3" Bar and Plate Core Design
3" Billet Aluminum Inlet/Outlet
100% TIG-Welded
1/8" NPT brass condensation drain with included plug
Includes 3" mandrel bent aluminum hot & cold side tubes
Powder-coated wrinkle-black for heat resistance
1/8" NPT port, are provided for connecting pressure sensors or water methanol injection
5-Ply Polyester Reinforced Silicone coupling for strength
Includes premium stainless steel spring loaded t-bolt clamps for a secure fit
Includes hardware for a hassle-free installation
Reduces intake air temperatures up to 30 degrees
This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler set up for more power.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.
3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow.
Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses 3" inlets and outlets for superior strength and durability..
TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.
Condensation Drain:
The intercooler includes a 1/8" NPT vent, which can be used to drain any type of build up from the intercooler.
Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel spring loaded t-bolt clamps and heavy-duty 5-Ply couplings for strength.
Flow and Performance:
aFe Power's intercooler tube are constructed from 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. Also included is four 1/8" NPT port which is provided for a sensor or water-methanol injection.
aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tubes for an aggressive style.
Note:
This intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
