Turbosmart eBoost2 60mm Electronic Boost Controller (Sleeper) - 4 Port
Details
Turbosmart eBoost2 60mm Electronic Boost Controller (Sleeper) - 4 Port - TS-0301-1103
Turbosmart e-Boost2 is a second generation complete Boost Management System with 60psi max boost operating pressure! With market-leading features and and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet sophisticated and technologically advanced, the e-Boost2 is equally at home in a street-going vehicle as it is in a top-level racecar. e-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM.
What's in the Box?
- Turbosmart eBoost2 Head Unit
- Turbosmart 4 Port Solenoid
- Wiring Loom
- Hoses and Hose Fitting Kit
The Turbosmart eBoost2 60mm Electronic Boost Controller allows the user to control, monitor, map and compensate boost. While eBoost2 is fitted with a state-of-the art software, it has been designed to be easy and logical to use.
Boost Levels: up to 6 levels of boost.
Boost on Demand: provides instant overtaking power at your fingertips
Gear-based Mapping: set a different boost for each gear!
Adjustable Boost Levels: program boost against TIME or RPM.
Aux Output: fully programmable; controls water spray, methanol or nitrous injection.
RPM Compensation: eliminates boost drop-off at high RPM.
Peak Hold/Max Boost Recall: monitors boost and RPM.
Gate Pressure: eliminates wastegate creep.
Overboost Shutdown: provides added protection for your engine.
Display: programmable, can be configured to KPA, Bar or PSI.
Auto Dimming: with backlit buttons for hassle free navigation.
FAQs:
Q: What’s the first rule of boost control?
A: Ensure you have an over-boost cut-out. This is safety feature built in to basically all factory, aftermarket & programmable ECU’s. The eBoost Range has an Over-Boost Shutdown feature built in aswell – You can never be too careful. Make sure it is set at a sensible & reasonable limit. Increasing the boost will put more load on your engine and there are other tune related factory you must always consider. If in any doubt, speak with a professional tuner / calibrator.
Q: Can I use this on any turbocharged engine?
A: If your engine is turbocharged and uses a boost-based actuator for control, then yes. This Boost Controller will work on boost-based internal wastegate actuators aswell as external wastegates.
Q: How much boost can I add?
A: This will come down to the rest of your setup & tune. If in any doubt we recommend you contact a professional tuner or workshop for advice here.
Q: What is Gate Feature?
A: Gate Feature is a unique Turbosmart feature that ensures our boost controllers can give you the best possible response. By manipulating the pressure signal into your actuator, Turbosmart’s Boost Controllers can provide the most aggressive boost curve.
Q: How Many Boost Levels Can I have?
A: The Turbosmart eBoost2 60mm Electronic Boost Controller (Sleeper) - 4 Port has 6. You can trigger these in several ways, including boost by gear.
Q: How much Boost Can it Control?
A: Turbosmart eBoost2 60mm Electronic Boost Controller: Up to 60psi
Q: What does 4 Port Mean?
A: This refers to the solenoid that is included with the kit. Traditionally a 3 Port solenoid is what most setups will use and is a relatively simple systems and connects to just one side of the wastegate or actuator diaphragm. a 4 Port solenoid gives you more control, a wider range of boost control options by enabling you to manipulate the signal to both top and bottom cap of your wastegate, or twin port actuator.
More Information
| Part Number | TS-0301-1103 |
|---|---|
| Brand | Turbosmart |
| Type of Part | Boost Controllers |
| Length | 6 |
| Width | 5 |
| Height | 5 |
| Weight | 2.000000 |
Reviews
Fitment
Turbosmart eBoost2 60mm Electronic Boost Controller (Sleeper) - 4 Port - TS-0301-1103
Turbosmart e-Boost2 is a second generation complete Boost Management System with 60psi max boost operating pressure! With market-leading features and and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet sophisticated and technologically advanced, the e-Boost2 is equally at home in a street-going vehicle as it is in a top-level racecar. e-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM.
What's in the Box?
- Turbosmart eBoost2 Head Unit
- Turbosmart 4 Port Solenoid
- Wiring Loom
- Hoses and Hose Fitting Kit
The Turbosmart eBoost2 60mm Electronic Boost Controller allows the user to control, monitor, map and compensate boost. While eBoost2 is fitted with a state-of-the art software, it has been designed to be easy and logical to use.
Boost Levels: up to 6 levels of boost.
Boost on Demand: provides instant overtaking power at your fingertips
Gear-based Mapping: set a different boost for each gear!
Adjustable Boost Levels: program boost against TIME or RPM.
Aux Output: fully programmable; controls water spray, methanol or nitrous injection.
RPM Compensation: eliminates boost drop-off at high RPM.
Peak Hold/Max Boost Recall: monitors boost and RPM.
Gate Pressure: eliminates wastegate creep.
Overboost Shutdown: provides added protection for your engine.
Display: programmable, can be configured to KPA, Bar or PSI.
Auto Dimming: with backlit buttons for hassle free navigation.
FAQs:
Q: What’s the first rule of boost control?
A: Ensure you have an over-boost cut-out. This is safety feature built in to basically all factory, aftermarket & programmable ECU’s. The eBoost Range has an Over-Boost Shutdown feature built in aswell – You can never be too careful. Make sure it is set at a sensible & reasonable limit. Increasing the boost will put more load on your engine and there are other tune related factory you must always consider. If in any doubt, speak with a professional tuner / calibrator.
Q: Can I use this on any turbocharged engine?
A: If your engine is turbocharged and uses a boost-based actuator for control, then yes. This Boost Controller will work on boost-based internal wastegate actuators aswell as external wastegates.
Q: How much boost can I add?
A: This will come down to the rest of your setup & tune. If in any doubt we recommend you contact a professional tuner or workshop for advice here.
Q: What is Gate Feature?
A: Gate Feature is a unique Turbosmart feature that ensures our boost controllers can give you the best possible response. By manipulating the pressure signal into your actuator, Turbosmart’s Boost Controllers can provide the most aggressive boost curve.
Q: How Many Boost Levels Can I have?
A: The Turbosmart eBoost2 60mm Electronic Boost Controller (Sleeper) - 4 Port has 6. You can trigger these in several ways, including boost by gear.
Q: How much Boost Can it Control?
A: Turbosmart eBoost2 60mm Electronic Boost Controller: Up to 60psi
Q: What does 4 Port Mean?
A: This refers to the solenoid that is included with the kit. Traditionally a 3 Port solenoid is what most setups will use and is a relatively simple systems and connects to just one side of the wastegate or actuator diaphragm. a 4 Port solenoid gives you more control, a wider range of boost control options by enabling you to manipulate the signal to both top and bottom cap of your wastegate, or twin port actuator.
